Cart 0
Cart 0

Schlage 9691t Instructions NEW

Schlage 9691T RFID Kit Instructions

Use this guide with the Sumokey Schlage 9691T RFID Kit for authorized Schlage 9691T RFID key fob duplication and customer reference.

Authorization Required: Only use this kit with RFID credentials you own, manage, or have written permission to duplicate. Apartment, HOA, workplace, and building access policies may vary.
Sumokey Schlage 9691T RFID Kit with USB RFID Device and Dual-Frequency RFID Fob

What’s Included

USB RFID Device

The single USB RFID Device included with the updated Sumokey Schlage 9691T RFID cloning kit.

Dual-Frequency RFID Fob

Compatible blank RFID fob supporting 125 kHz and 13.56 MHz.

Schlage 9691T is a Dual-Frequency RFID Key Fob

The Schlage 9691T key fob may contain both low-frequency and high-frequency RFID technology. A complete authorized RFID duplication may require both portions to be completed.

Low Frequency

125 kHz RFID portion used by some access readers.

High Frequency

13.56 MHz RFID portion used by compatible access readers.

Important: Complete both the low-frequency and high-frequency portions before testing the copied RFID fob.

USB RFID Device Orientation

  • The USB-C cable exits from the bottom of the device.
  • Button 1 is the top-left button.
  • Button 2 is the top-right button.
  • Place RFID fobs flat on the device and keep them still during confirmation.

Low-Frequency Portion — 125 kHz

Low-Frequency Confirmation

Use the included USB RFID Device with the original Schlage 9691T credential and the blank Sumokey Dual-Frequency RFID Fob.

1. Place your original fob flat on the cloning device.
2. Press Button 1 to scan the low-frequency part of the fob.
3. Wait for the confirmation beep. The beep means the device successfully read the fob.
4. Remove the original fob.
5. Place the fob you want copied onto the device.
6. Press Button 2 and keep the fob in place until you hear the confirmation beeps. The confirmation beeps mean the copy was written successfully.

High-Frequency Software — 13.56 MHz

Download the PN532 software for your operating system:

https://github.com/jumpycalm/pn532-cloner/releases/
  • PN532-Cloner-Mac-x64.tar — for Mac computers
  • PN532-Cloner-Win-x64.exe — for Windows computers

Mac Setup Notes

Mac downloads may come as a .tar file. Double-click the file to extract it.

Once extracted, locate the unzipped file. Hold Control and click it, then choose Open With → Terminal.

If macOS blocks the app, go to System Settings → Privacy & Security and choose Open Anyway.

High-Frequency Software Workflow

  1. Open the PN532 software.
  2. Place the original Schlage 9691T fob on the USB RFID Device.
  3. Type r and press Enter.
  4. Wait until you see Read Success.
  5. Remove the original fob and place the blank Sumokey Dual-Frequency RFID Fob on the device.
  6. Type w and press Enter.
  7. When you see Write Success, the high-frequency portion is complete.
Tips:
Do not use the device on a metal surface. Keep your computer awake during the read process, since this step can take several minutes.

Completion Check

A complete Schlage 9691T RFID key fob copy may require both the 125 kHz low-frequency portion and the 13.56 MHz high-frequency portion. If your copied fob only works on some doors, gates, or readers, one portion may still need attention.

Troubleshooting

Device Not Detected

Try a different USB port, confirm the USB-C cable is fully connected, and restart the software.

No Confirmation Beep

Make sure the RFID fob is flat on the device, keep it still, and avoid metal surfaces.

High-Frequency Read Failed

Reposition the original fob, keep the computer awake, and allow the software several minutes to complete.

High-Frequency Write Failed

Confirm you are using the blank Sumokey Dual-Frequency RFID Fob and that it is placed flat on the device.

Low-Frequency Issue

Confirm the device is connected, the RFID fob is flat on the device, and you received confirmation beeps before testing.

Original Credential Not Working

Test the original Schlage 9691T fob first. If the original does not work, the copied fob may not work either.

Frequently Asked Questions

Can I duplicate a Schlage 9691T key fob?
Yes, when you are authorized to duplicate the credential and have the correct compatible RFID cloning kit.

Why is the Schlage 9691T dual frequency?
The Schlage 9691T may contain both 125 kHz and 13.56 MHz RFID technology.

Why do both frequencies need to be completed?
Some buildings use one frequency for certain readers and the other frequency for different access points.

How long does the process take?
The time can vary depending on the credential, computer, and software. The high-frequency portion may take several minutes.

What if the copied fob only works on some doors?
That usually means only one frequency was completed successfully. Review both sections or contact Sumokey support.

Which operating systems are supported?
The software download page includes files for Mac and Windows.

When should I contact Sumokey support?
Contact us if your device is not detected, you do not receive confirmation beeps, the software does not show success, or your copied RFID fob only works on some readers.

Need help with your Schlage 9691T RFID key fob copy?
Email us at support@sumokey.com